Meyra 2.322, Руководство по техническому обслуживанию и ремонту

Страница: 22 / 52

22
Seat inclination (camber)
Replacing the adjustment motor for seat inclination
1. Pull the attachment plug of the adjustment motor (1)
for seat inclination adjustment from the adjustment
module (2) underneath the seat frame.
2. Remove the screws (3) for attachment of the adjust-
ment motor for seat inclination adjustment.
☞
In doing so watch for cables that might still be attached.
– If required, remove corresponding cable binders.
Assembly of the adjustment motor is done analogue in re-
verse order.
☞
Then carry out a function test.
☞
For this observe chapter Functional checks on
page 46.
2
1
3
3