Meyer SXI 720 Скачать руководство пользователя страница 39

Страница: 39 / 132

1-800-325-9103

PB-SXIC

- 39 -

www.meyermfg.com

Lubricate (3) chain couplers on the rear drive with new 30 weight oil. The couplers are accessible by opening the

front and rear shield.

Grease (2) PTO input shaft bearings with approximately 1 pump of grease. The bearings are accessible on the left

side of the PTO cover shield.

Grease (2) rear spinner lower bearings with approximately 2 pumps of grease. The bearings are grease line fitted

to the left rear frame channel of the spreader.

Grease (2) tandem wing pivots. Over greasing is not possible.

Grease (2) rear gate slide guides. Grease the slide guides from the top side with the rear gate opened. Allow

grease to lubricate rear gate ends and slide guide surfaces. In freezing weather, dump used motor oil down each slide
guide once a week or more often if needed. Over greasing is not possible.

Grease (1) integral overrunning clutch on the spinner transfer shaft connection to the corner gearbox.

SHIELDS REMOVED FOR ILLUSTRATIVE

PURPOSES ONLY.

L10

L20

L21

L12

L21

L22

L14

L20

(LEFT SIDE)

L11

L19

L13

L23

RIGHT SIDE GREASE PORTS

LEFT SIDE GREASE PORTS

L20

L16

L10

L20

L18

L24

L25

L18

L10

L11

L12

L13

L14

Содержание SXI 720





































































































































Результаты поиска

Содержание SXI 720

Отзывы:

Meyer SXI 720, Руководство владельца/оператора и каталог запчастей, Страница: 39 / 132

Результаты поиска

Содержание SXI 720

Отзывы: