Meyer SXI 720 Скачать руководство пользователя страница 15

Страница: 15 / 132

1-800-325-9103

PB-SXIC

- 15 -

www.meyermfg.com

Safety Precautions For Tractor Towed Units:

•

Do not exceed 20 mph (32 kph). Reduce speed on rough roads and surfaces.

•

Always install a SMV emblem on pull-type equipment when transporting on roadways and keep clean and bright.

•

Always yield to oncoming traffic in all situations and move to the side of the road so any following traffic may pass.

•

Comply with state and local laws governing highway safety and movement of machinery on roadways.

Safety Precautions For Hydraulic System:

•

Check hydraulic tubes, hoses and fittings for damage and leakage. Never use hands to check for leaks. Hydraulic
tubes and hoses must be properly routed and have adequate support and secure clamps. Tighten or replace any parts
that show leakage.

•

Always clean fluid spills. Do not use gasoline or diesel fuel for cleaning parts. Use commercial nonflammable solvents.

Содержание SXI 720





































































































































Результаты поиска

Содержание SXI 720

Отзывы:

Meyer SXI 720, Руководство владельца/оператора и каталог запчастей, Страница: 15 / 132

Результаты поиска

Содержание SXI 720

Отзывы: