Meyer SXI 720 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 132

Meyer SXI 720 Скачать руководство пользователя страница 30

Meyer Manufacturing Corporation

- 30 -

PB-SXIC

6.9.2 Tractor Towing Size Requirements

Use the following charts to help calculate the minimum tractor weight when towing without implement brakes. The
minimum tractor weight, up to 20 mph (33 kph) needs to be two thirds of the box Gross Weight (GW). Gross Weight is
calculated by the empty weight of the box and undercarriage combined added to the Load Weight. Then take the Gross
Weight and multiply it by 0.667 and you will get the Minimum Required Weight of the Tractor.

Spreader Loaded Weight x .667 = Minimum Tractor Weight Up to 20 mph

6.9.3 Spreader Brake Information (Optional)

Two optional brake systems are offered for your spreader. A brake system is recommended for any spreader operated on
public roads and may be a requirement.

6.9.3.1 Lever Operated Hydraulic Brakes

This brake system is connected to the tractor remote hydraulic ports and is controlled by the tractor’s in-cab controls.

865 Only: The two hose system has a hydraulic manifold pressure relief to prevent the pressure to the activating cylinders
to exceed the relief valve setting.

Applying hydraulic pressure from the tractor causes tractor hydraulic fluid to activate the 720 cylinder or 865 cylinders
which apply the brakes.

Applying The Brakes

(720)

- Gradually activate the tractor spool valve lever forward to apply the brake. The hydraulic

hoses should be connected to the tractor port so the spool valve lever gives the expected response. Test this after
hooking up. If response is opposite of expected, switch hose to opposite port.

Applying The Brakes

(865)

- Gradually activate the tractor spool valve lever forward to apply the brake. The hydraulic

hose should be connected to the tractor port so the spool valve lever gives the expected response. Test this after
hooking up. If response is opposite of expected, reverse the hoses.

Releasing The Brakes

- Move the tractor spool valve lever to “the float” position.

6.9.3.2 Pedal Operated Hydraulic Brakes

This brake system is a one hose system. The single hydraulic hose must be connected to the tractor remote pedal port.

Applying The Brakes

- Gradually apply the tractor brake pedal to apply the brakes.

Releasing The Brakes

- Release the tractor brake pedal to release the brakes.

Model

MAXIMUM SPREADER

GROSS WEIGHT (LBS)

MINIMUM TRACTOR WEIGHT UP

TO 20 MPH (LBS)

720

49,880

33,500

865

55,820

37,250

Simply returning the spool valve lever to the neutral position will not
release the brakes.

At no time should the brake system be used as a parking brake. With
loss of hydraulic pressure, the brakes will lose their holding power.

«
...
28
29
30
31
32
...
»

Содержание SXI 720





































































































































Отзывы:

Нет отзывов