Meyer SXI 720 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 132

Meyer SXI 720 Скачать руководство пользователя страница 28

Meyer Manufacturing Corporation

- 28 -

PB-SXIC

6.9 TRANSPORTING

AVOID SERIOUS INJURY OR DEATH

•

Read and understand owner’s manual before using. Review
safety precautions annually.

•

Before operating the spreader, look in all directions and make
sure no bystanders, especially small children are in the work
area.

•

No riders allowed when transporting.

•

Do not drink and drive.

•

Before moving, be sure required lights and reflectors are
installed and working.

•

Before maintenance or repair, stop vehicle, set parking brake,
and remove ignition key.

•

Place safety stands under frame and chock wheels before
working on tires or chassis.

•

Maintain wheel bolts at torque as recommended in the manual.

•

If equipped with brakes, maintain proper adjustment.

Pull-Type Units

•

Use flashing warning lights when transporting on ALL highways
(public roadways) at ALL times (Tractor towed models) EXCEPT
WHEN PROHIBITED BY LAW! (Check w/local law enforcement).

•

By all state and federal laws, implement lights do not replace the
SMV (Slow-Moving Vehicle) identification emblem. All towed
agricultural vehicles must display SMV emblems when traveling
LESS than 20 mph (32 kph).

•

Check for traffic constantly. Be sure you can see that no one is
attempting to pass you and that all traffic is sufficiently clear
from you before making any turns.

•

Securely attach to towing unit. Use a high strength appropriately
sized hitch pin with mechanical retainer and attach safety chain.

•

Do not exceed 20 mph (32 kph). Slow down for corners and
rough terrain.

To Prevent Serious Injury Or Death

•

Keeps hands and body out of the hitch area when attaching
towing vehicle.

•

Keep body clear of crush point between towing vehicle and load.

To Prevent Serious Injury Or Death

•

Shift to lower gear before going down steep grades.

•

Avoid traveling on slopes or hills that are unsafe.

•

Keep towing vehicle in gear at all times.

•

Never exceed a safe travel speed (which may be less than 20
MPH.)

«
...
26
27
28
29
30
...
»

Содержание SXI 720





































































































































Отзывы:

Нет отзывов