Meyer Drive Pro LD, Руководство владельца и руководство пользователя

Страница: 6 / 26

STEP 1a
Attach the two wheel assemblies with the shorter brackets to either
side of the plow pivot bar (fig. 1 & 2) and the third wheel assembly
to the Lift Frame Assembly under the lifting cylinder.
STEP 1b
Install Plow Markers to each side of plow using 5/16-18 x 1” bolt,
5/16 flatwashers and 5/16-18 locknut as shown below.
STEP 1:
PLOW LIFT FRAME ASSEMBLY
(Fig. 1) (Fig. 2)
9, 12
SAFETY PRECAUTIONS - See pages 2-3 for definitions
Your Drive Pro Light Duty should now look like the picture below.
(Auto-Angling with hydraulic lift shown)
4