Meyer Drive Pro LD, Руководство владельца и руководство пользователя

Страница: 14 / 26

Troubleshooting Guide for The Drive Pro LD Auto Angling
Motor Solenoid S1
Raise X
Lower
X
Auto-Angling Model
“X” are the energized items.
24 7, 12, 13, 15, 16, 17, 19, 20, 21
SAFETY PRECAUTIONS - See pages 2-3 for definitions
12
Condition Possible Cause Correction
Plow doesn’t lift
or lifts slowly -
motor operates 1. Low hydraulic fluid level
2. Discharged battery
3. Leaking or open “S1” cartridge
4. Malfunctioning Hydraulic Unit 1. Add fluid to proper level
2. Recharge battery
3. Clean or replace “S1” cartridge
4. Replace Hydraulic Unit
Motor doesn’t
operate 1. No current to motor solenoid (small
red wire)
2. Small puple wire not grounded
3. Malfunctioning Motor Solenoid
4. Malfunctioning Motor
5. Malfunctioning Hydraulic Unit 1. Location malfunctiuon and repair (check
controller)
2. Ground small purple wire
3. Replace Motor Solenoid
4. Replace Motor
5. Replace Hydraulic Unit
Plow doesn’t
lower 1. No cuirrent to “S1” coil (white and
black with white stripe wires)
2. “s1” cartridge jammed in closed
position
3. Inoperative “S1” coil (black with white
stripe and white wire) 1. Location malfunction and repair (check
controller)
2. Replace “S1” cartridge
3. Replace “S1” coil
Plow creeps down 1. Leaking “s1” cartridge
2. Leaking Raise Cylinder 1. Clean or replace “S1” cartridge
2. Replace Raise Cylinder