Meyer AG-10, Руководство по эксплуатации и обслуживанию

Страница: 8 / 45

1. Moldboard
Steel or polyethylene sheet is bump and corrosion-resistant. Built
to last.
2. Cutting Edge
Replaceable, high carbon steel provides extra long operating life;
should be 1/2” above ground in plowing position. (Can be higher
when used on gravel driveways.)
3. Runners
Full-swivel adjustable and replaceable runners hold cutting edge at
proper height.
4. Trip Springs
Allow moldboard to trip forward and ride over obstructions without
losing snow load—protects snow plow, vehicle, and operator.
5. Sector/5A Pivot Bar
High quality steel—positions moldboard straight across, or angle
right or left.
6. Pivot Pin
Pin that attaches moldboard to sector.
7. A-Frame
Designed to attach snow plow to vehicle, to pivot moldboard for
angle plowing, and to hold plow at proper distance in front of
vehicle.
8. Power Angling Cylinders
Hydraulically positions the moldboard straight, or to right or left.
9. Sector-Shear Pin
Only on E-46 Electro-Lift ® manual angling plows.
Self-locking pin for locking moldboard in a straight or angled
position. The sector shear pin is designed to shear under hard
impact with a curb or other obstruction, thus protecting the snow
plow and vehicle.
Get to know your Meyer
®
EZ Mount Snow Plow
10. Clevis Frame
Allows adjustment of the Snow Plow A-Frame attaching point
(clevis height) for transfer of power from the vehicle frame to the
snow plow. Clevis frame weather plugs (Item 17) protect receiver
tubes from dirt and moisture when lift frame (Item 12) is removed.
Note: Adjustment bolt threads should be coated with chassis
grease or anti-seize lubricant. Adjust bolts for minimum
clearance between lift frame and receiver tubes while still
allowing for ease of lift frame removal.
11. Linch Pins
Allow snow plow assembly to be attached or detached from
vehicle in minutes.
12. Tubular Lift Frame (EZ Mount ® only)
Allows for fast, complete removal of front end hardware, snow
plow lights and hydraulic unit in one complete module.
13. Lift Arm
Chain locks in position to lift snow plow.
WARNING: LIFT ARM EXTENDS BEYOND BUMPER OF
VEHICLE. TO MINIMIZE DAMAGE FROM A FRONT-END
COLLISION, LIFT ARM SHOULD BE REMOVED FROM
VEHICLE WHEN SNOW PLOW IS REMOVED.
14. Meyer Nite Saber Lights
Complies with the Federal Motor Vehicle Safety Standards.
15. Electric Hydraulic Power Unit
Operates snow plow hydraulically—raises, lowers, angles, holds
and floats moldboard in plowing position.
16. Sno-Flo
®
Powder Coat
Baked on finish that looks like glass, provides an extremely hard,
low friction surface that outlasts ordinary paint by a large margin.
6