Meyer AG-10, Руководство по эксплуатации и обслуживанию

Страница: 4 / 45

Get to know your Meyer
®
™
Snow Plow
2
1. Moldboard
Steel or Polyethylene sheet is bump and corrosion resistant. Built
to last.
2. Cutting Edge
Replaceable high carbon steel provides extra long operating life;
should be 1/2” above ground in plowing position. (Can be higher
when used on gravel driveways.)
3. Runners
Adjustable and replaceable runners hold cutting edge at proper
height.
4. Trip Springs
Allow moldboard to trip forward and ride over obstructions, this
protects the snow plow, vehicle, and operator.
5. Sector
High quality steel - positions moldboard straight across, or angle
right or left.
6. Pivot Pin
Pin that attaches the moldboard to the sector.
7. A-Frame
Designed to attach the snow plow to the vehicle, to pivot moldboard
for angle plowing, and to hold plow at proper distance in front of
vehicle.
8. Power Angling Cylinders (1-1/2” x 10”)
Hydraulically positions the moldboard straight, or to right or left.
9. Clevis Frame
Allows snow plow assembly to be attached or detached from vehicle
in minutes.
10. MDII Lift Frame
Allows for fast, complete removal of front end hardware, snow plow
lights and hydraulic unit in one complete module.
11. Attaching Pins
Pull 4 blue pins to remove complete assembly or pull 2 yellow pins
to remove moldboard assembly.
12. Lift Arm
Dual Chain locks in position to lift snow plow.
WARNING: LIFT ARM EXTENDS BEYOND BUMPER OF
VEHICLE. TO MINIMIZE DAMAGE FROM A FRONT END
COLLISION, LIFT ARM SHOULD BE REMOVED FROM VEHICLE
WHEN SNOW PLOW IS REMOVED.
13. Meyer Snow Plow Lights
Complies with the Federal Motor Vehicle Safety Standards.
14. Electric Hydraulic Power Unit (E-60H, E-57H)
Operates snow plow hydraulically- raises, lowers, angles, holds and
floats moldboard in plowing position.
15. Sno-Flo® Powder Coat
Baked on finish that looks like glass, provides an extremely hard,
low friction surface that outlasts ordinary paint by a large margin.
16. Crankstand
Positions Moldboard and Lift Frame for easy attaching and
detaching.
17. Hydraulic Cover
Protects the Hydraulic Unit from the elements and also enhances
the appearance of your vehicle.