Meyer AG-10, Руководство по эксплуатации и обслуживанию

Страница: 31 / 45

STRAIGHT LINE SNOW PLOWING
This method is most efficient for drives, streets, roads and
walkways. Moldboard type blade snow plows mounted on
utility vehicles or service trucks are best for such an operation.
Set the snow plow moldboard at an angle so that the snow is
rolled to the shoulder or curb.
Single lane walks, roads and aisles can often be cleared with
one pass.
When the road is more than twice the moldboard's width,
plow a center lane for the first full pass. Then, in follow-up
passes, work the snow to the sides. The diagram illustrates
plowing sequence for a typical 20-foot road.
Corner clearing is almost automatic when clearing intersecting
streets. When snow is heavy, a little "stop over" snow may
have to be removed from intersections by additional short
passes.
We recommend a speed of 5 to 15 MPH for this kind of
plowing. Of course, road surface, weather conditions and
equipment will influence your speed.
Plow with the storm.
DRIVEWAYS
1. Plow toward garage
pushing snow to one side.
2. Set blade to straight
position, lift it as high as
possible and drive through
snow to garage. Drop
blade and back drag to
street.
3. Back into driveway and
angle blade again. Use as
many passes as necessary
to clear drive.
WIDE DRIVEWAY
1. Make one pass down center
with blade in straight position.
2. Push snow to side with
moldboard angled.
3. Do the same on either side.
29