Wall formwork
Mammut XT
90° corner – Outside corner
Fig. 43.1
The Mammut XT outside corners
0, 10 and 15 (Fig. 43.3) together
with the Mammut XT panels and
the M assembly lock result in a
solid 90° outside corner solution
(Figures 43.1 and 43.2 and page
XT-38).
For the number of M assembly
locks required for a Mammut XT
outside corner (a), for the next
panel joint (b) as well as for the
standard panel joint (c) refer to
Table 43.6. This applies to both
single-sided (Fig. 43.1) and two-
sided tying (Fig. 43.2) in the cor-
ner area. For the assembly locks
and alignment rails required for
height-extended outside corners
refer to page XT-45).
Instead of using the Mammut XT
outside corner, two Mammut XT
panels can be butt jointed. In this
case, the panels are then bolted
together using M outside corner
brackets and flange screws 18
(Fig. 43.5). Refer to Table 43.7
for the number of M outside
corner brackets required.
b
b
a
a
Mammut XT
outside corner
0 cm
10
15
Fig. 43.3
Panel height
(in cm)
Number of M assembly locks
(single-sided
and two-sided tying)
(a)
(b)
(c)
350
4
4
3
300
3
3
2
250
3
2
2
125
2
2
2
0
10
15
Fig. 43.4
M outside corner bracket
Flange
screw 18
Table 43.6
Description
Ref. No.
M cross stiffener 44 ...............
29-401-02
M assembly lock ....................
29-400-71
Uni-assembly lock 22 ............
29-400-85
Uni-assembly lock 28 .............
29-400-90
M outside corner bracket ......
23-137-63
Flange screw 18 ....................
29-401-10
Fig. 43.5
Table 43.7
Panel height
(in cm)
Number of M
outside corner
brackets
Number of M
assembly locks
(b)
350
4
4
300
3
3
250
2
2
125
2
2
b
b
a
a
c
c
c
c
Fig. 43.2
XT-43
Technical Instruction Manual / Status September 2018
