Wall formwork
Mammut XT
Stripping corner
The M stripping corner can also
be used as a stripping support
for panels between corners
inside a room. In this case,
the stripping corner is used to
reduce the tension between the
panels so that they can easily be
removed from the poured wall
between the corners.
Stripping procedure
1. Remove the M assembly locks
connecting the stripping corners
to the panels (Fig. 55.1).
2. Activate the M stripping cor-
ner (Fig. 55.2 and pages XT-52
to -54).
3. Lift the stripping corners off,
then strip the panels (Fig. 55.3).
Fig. 55.1
Fig. 55.2
Fig. 55.3
M stripping corner has been
activated
XT-55
Technical Instruction Manual / Status September 2018
