Meva Mammut XT, Руководство пользователя

Страница: 7 / 19

Wall formwork Mammut XT
Description Ref. No.
M 350 hinged corner
outside 350/12.5 ...................
23-137-70
inside 350/40 ......................... 23-137-30
M hinged corner
outside 300/12.5 ...................
23-137-71
inside 300/40 ......................... 23-137-31
outside 250/12.5 ................... 23-137-81
inside 250/40 ......................... 23-137-41
outside 125/12.5 ................... 23-137-91
inside 125/40 ......................... 23-137-51
Hinged corner
Acute and obtuse angled corners
are formed using hinged inside
and outside corners (Fig. 46.1).
Side length
Æ Outside corner 12.5 cm
Æ Inside corner 40 cm
Adjustment range:
60° to 180°
At the outside corner, align-
ment rails must be attached to
the multi-function profiles with
flange screws.
If the inside angle
α
is greater
than 100°, alignment rails and
a wooden blocking are also
required on the inside (Fig. 46.2).
Timber fillers and Uni-assembly
locks are used for length com-
pensation (Figures. 46.1 and
46.2).
The hinged outside and inside
corners can be set to an angle
of 70°, 90°, 120°, 135° or 180°
with a locking device (Fig. 46.3).
Height 300
If 300 cm high M hinged corners
are used, Mammut 350/Mammut
panels are to be used next to the
hinged outside corner.
Fig. 46.2
Locking device
Locking
device
22.6
70°
22.6
90°
16
90°
16
120°
22.6
135°
16
135°
22.6
22.6
16
12.5
40
Fig. 46.1
Wooden blocking
Bolt M18x100
Timber filler with Uni-assembly lock
Alignment rail
Fig. 46.3
α
Mammut 350/Mammut panel
Mammut XT panel
XT-46 Technical Instruction Manual / Status September 2018