manualshive.com logo in svg

Mettler Electronics Sys*Stim 294, Инструкция по эксплуатации

Поделиться
Скачать
Mettler Electronics Sys*Stim 294 Скачать руководство пользователя страница 7

Sys*Stim 294 Instruction Manual—

 

Rev.F_09/13/17 

7 

1.4 Caution

 

Federal law restricts the sale of this device to, or on the order of, a physician, dentist, 
veterinarian or any other practitioner licensed by law of the state in which he practices. 
Use of controls or adjustments or performance of procedures other than those specified 
herein may result in hazardous exposure to electrical energy. The electric energy delivered 
by this device may possibly be lethal. Treatment should be administered only under the 
direct supervision of a health care professional. 

1.5 Shipping Damage 

Your new Sys*Stim 294 is shipped complete in one carton. Upon receipt, please inspect the 

carton and the unit for visible and hidden damage. If you discover any damage, hold all 
shipping materials, including the carton, and call the shipping agent who delivered the 
unit. They are responsible for all damage in transit; therefore, all claims should be filed 
directly with them. The factory will not be responsible for any damage in shipment, nor 
allow any adjustments unless proper formal claim has been filed by the receiver against 
the carrier. 
The carton in which your new Sys*Stim 294 was received is specially designed to protect 

the unit during shipping. Please retain all shipping materials in the event that you will 
need to return your unit for servicing. NOTE: All warranty repairs are to be performed by 
Mettler Electronics Corp. or an authorized Mettler Electronics warranty repair center. 

1.6 Package Contents 

Your new Sys*Stim 294 comes complete with all the necessary components to perform 

neuromuscular electrical stimulation. Below is a list of items that are included in the 
shipping carton. 
1.

 

Sys*Stim 294 

2.

 

Four electrode cable sets, (ME 2260) 

3.

 

Two gray pin to banana adapters, (ME 2027) 

4.

 

One package each EZ Trodes, 2" diameter (ME 2221) and 2.75" diameter (ME 2222) 

5.

 

Detachable U.L. listed, hospital–grade line cord, (ME 7293) 

6.

 

Instruction Manual, 

Electrical Stimulation & Ultrasound

 

Pocket Guide

 and Warranty Card 

1.7 Limited Warranty 

The Sys*Stim 294 neuromuscular electrical stimulator is warranted against defects in 

materials and workmanship for a period of two years from date of purchase. During the 
applicable warranty period Mettler Electronics Corp. will, at its discretion, either repair or 
replace the Product without charge for these types of defects.  
For service under this warranty, the Product must be returned by the buyer within the 
applicable warranty period to Mettler Electronics Corp. 

Shipping charges to Mettler 

Electronics Corp. under this warranty must be paid by the buyer. The buyer must also 
include a copy of the sales receipt or other proof of the date of purchase. If the Product 

Содержание Sys*Stim 294













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды