Metronic AccessBox, Руководство пользователя

Страница: 15 / 24

14
This operation resets the memory, including all settings, as well as the channel list.
Beware, all the modifications you carried out will be lost.
To reset the receiver, do the followings:
• Go into MENU /
INSTALLATION / FACTORY DEFAULT
• Press OK, confirm with YES and wait for a few seconds. The receiver will reset and ask for
the desired language.
If you wish to listen to the radios broadcast by the satellite, just press on TV/R key to swap
from the TV list to the Radio list. You can then change channel just as with TV's. You may
remove, move etc the radios in the same way as for the TV channel.
Simply connect your video cassette recorder on the VCR scart socket. To record the digital, it
is necessary that the receiver is switched on the channel you want to record. Remember that
you can automatically switch the receiver ON with the Timer feature. Put the VCR on the chan-
nel dedicated to its scart input (0, AV, EXT....) and launch the recording. If you encounter a
problem to do so, check the user guide of the video cassette recorder for exact operating.
To play a tape, just press the PLAY key of your VCR, it will automatically take the hand over
the satellite receiver. If not, try and press on TV/VCR key of your VCR remote control.
VCR
Back
AccessBox
Back
Figure 6
RESETTING THE RECEIVER
14
RADIOS
15
USE WITH A VCR
16
Ntc Accessbox-GB 3/11/03 8:44 Page 15