Metrologic SP5500 OptimusS Series, Руководство пользователя

Страница: 47 / 61

25
Application Creation
Bar code properties (cont.)
Enable Code 93
Click on this checkbox to enable Code 93 as an active bar code type.
Enable Code 128
Click on this checkbox to enable Code 128 as an active bar code type.
EAN8 EAN13
EAN or European Article Numbering system (also called JAN in Japan) is a European
version of UPC. It uses the same size requirements and a similar encoding scheme as
for UPC codes.
EAN-8 encodes 8 numeric digits consisting of two country code digits, five data digits and
one check digit.
EAN-13 is the European version of UPC-A. The difference between EAN-13 and UPC-A
is that EAN-13 encodes a 13th digit into the parity pattern of the left six digits of a UPC-A
symbol. This 13th digit, combined with the 12th digit, usually represent a country code.
Both EAN-8 and EAN-13 support a supplemental two or five digit number to be appended
to the main bar code symbol. Supplemental messages must consist of either two or five
numeric digits and will appear as a small additional bar code on the right side of a
standard EAN symbol.
Enable EAN8
Setting enables EAN8 as an active bar code type.
Convert to EAN13
This setting enabled will allow an EAN8 bar code type read to be expanded and
converted to an EAN13. The decoding of the bar code will then be processed as
an EAN13.
Transmit Checksum
The checksum character will be
included in the data being
transmitted when this setting is
enabled.
Enable EAN8 Addon
Enable EAN8 Addon 2
Setting enables the ability of the
scanner to scan and decode the 2
character supplemental.
Enable EAN8 Addon 5
Setting enables the ability of the
scanner to scan and decode the 2
character supplemental.
Figure 15