Metrologic IS4320 ScanGlove, Руководство по программированию

Страница: 6 / 48

* *
R 1 8
R 1 9
D F 1
Enter/Exit Program Mode
2
Enter Program Mode
**Ability to Enter Program When this option is selected, enter
Mode After Any Scan
programming by scanning the
ENTER/EXIT PROGRAM MODE bar
code after power up or during normal
scanning operation.
Enter Program Mode Only
When this option is selected, the scanner
on First Scan will only enter program mode after power-
up. Scan the ENTER/EXIT PROGRAM
MODE bar code immediately after the
scanner first receives power. This option
prevents the scanner from accidentally
entering program mode during normal
scanning operation.
Recall Defaults
If during programming of the scanner, there is a need to return the scanner to
the original factory settings, scan the RECALL DEFAULTS bar code. Any
settings selected during that session or any previous session will be lost .
Recall Defaults