manualshive.com logo in svg

Metrohm 757 VA Computrace, Руководство по оборудованию

Поделиться
Скачать
Metrohm 757 VA Computrace Скачать руководство пользователя страница 57

 

4.2  Safety considerations concerning mercury 

757 VA Computrace – Hardware 

 

53

 

4.2.2 

Toxicity of mercury and its compounds 

Mercury and its compounds are toxic since they react with enzymes containing sul-

fur and decompose them with the formation of HgS. The toxicity depends on the 

chemical and physical state of the mercury [4, 8 – 10]: 

• 

Metallic liquid mercury

 is readily resorbed by the skin and finds its way 

through glandular passages into lower skin regions where it is oxidized and 

carried on as a salt. 

• 

The low-solubility 

mercury (I) compounds

 and metallic mercury in the form 

of a coherent liquid have low toxicity when taken up orally (but not through the 

skin!). 

• 

Mercury (II) compounds

 are more readily soluble and therefore much more 

toxic: LD100 (the 100% lethal dose) for oral take-up is approx. 0.2

…

1 g. 

• 

Mercury vapor

 is highly toxic: vapor with an Hg concentration exceeding the 

TLV of 0.1 mg/m

3

 air causes chronic poisoning after prolonged breathing for 5 

to 8 hours per day. 

Despite the large number of laboratories involved in polarographic/voltammetric 

work, sensible and proper handling (see 

section 4.2.3

) has ensured that not one 

single case of mercury poisoning has been reported to date. The real Hg concen-

trations measured in the laboratory atmosphere are consistently far below the TLV 

(threshold limit value). 
 
 
 
 
 

4.2.3 

Handling of mercury 

Several safety rules, described in detail in what follows, must be observed in the 

handling of mercury owing to its toxicity (see 

section 4.2.2

): 

• 

Working in a fume cupboard

  

The handling of mercury should, if possible, always be carried out in a fume 

cupboard (hood). It must be ensured that no metal drops or spilling drop on 

the floor or the lab bench and that no evaporation of the metal occurs. 

• 

Working over plastic trays

  

Movements with vessels containing mercury must be carried out in, or at least 

above, rigid seamless trays made from plastic or enamelled metal. The sup-

plied 6.2711.030 Drip pan made of polystyrene is eminently suitable for this. 

• 

Collecting mercury from the measuring vessel

  

If work is performed with the MME, at the end of the determination the analy-

sis solution contains mercury which must be collected for later disposal. This 

can be done by collecting the analysis solutions in a large vessel and then 

decanting, by filtering the analysis solutions or by siphoning off the mercury 

using vacuum. 

Содержание 757 VA Computrace



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды