Metrohm 2.942.0500, Руководство пользователя, Страница: 20 / 63

3.3 Base tray and bottle holder
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
12
￭￭￭￭￭￭￭￭
942 Extension Module Vario SeS/PP (2.942.0500)
3 Remove the base tray.
Always mount the base tray under the lowermost instrument of the stack.
Mounting the base tray
Prerequisites
￭
The instrument is switched off.
￭
The bottle holder is cleared.
￭
All of the cable connections on the rear have been disconnected.
￭
There are no loose parts in the instrument.
￭
The instrument is lying on its side, and the bottom surface is visible.
Accessories
￭
3 mm hex key (6.2621.100)
1 3 2
Figure 5 Mounting the base tray
1 Mount the base tray in such a way that the openings in the base tray
match exactly the screw threads in the bottom of the instrument.
2 Slide the washers onto the cylinder screws. Insert the cylinder screws
with the washers and tighten them with the 3 mm hex key.
3 Set the instrument back up on the base tray.
Stack other instruments in the required order. Mount the bottle holder
(6.2061.100) onto the topmost instrument on the stack
(see "Mounting
the bottle holder", page 13) .