metrofires Ultra Insert, Инструкция по установке и эксплуатации для владельца, Страница: 4 / 16

4
ALWAYS ELECTRICALLY ISOLATE THE FAN WHEN IT IS
NECESSARY TO REMOVE THE FASCIA FROM THE FIRE
WARNING!
Important Information
Take care not to lift the fascia by the louvres as they can bend.
1. If you haven’t already fitted the door, do so now ensuring the spacer
washer is placed on top of the hinge pin as indicated in Diagram 2
(Inset A)
2. Ensure the four speed clips are positioned over the large diameter
mounting holes in the return folds at the front of the cabinet (fascia
mount points). Attach the fascia ensuring to lift it over the Top Panel
as you position it prior to pressing it into place. Attach the 4x fascia
mounting screws (8g x 19mm) while positioning the fascia evenly
around the door.
3. At this time ensure the fan unit is positioned with the grommets over
the location bolts at each end of the fan tray. Check the thermostat
plug is attached with wiring and lead kept away from the firebox. Any
excess lead must be shortened or positioned to the outside of heat
shields or cabinet. Ensure the fan rotates freely.
4. Rotate the door handle fully anti-clockwise before placement of the
fascia. The inner fascia slips snugly into the cabinet with the Top Rail
of the fascia resting onto the Top Panel of the cabinet.
5. The fascia should be evenly spaced around the door frame and sit
evenly against the masonry surround when the firebox cabinet has
been correctly positioned. (The door can still be removed from the fire
with the fascia in place when it is correctly fitted).
6. Open the door and remove the two nuts and air slide guide washers
to enable placement of the air slide. The air slide feeds ‘lever end’ first
behind the fascia and through the lever slot. Fit the guide washers
and nuts and ensure the slide moves freely with the lever resting
gently on the fascia slot.
7. Fit the 4x fascia mounting screws (8g x 19mm) into the speed clip
fixings earlier attached while positioning the fascia evenly around the
door. The air control knob can now be fitted.
Installation of the Ultra Insert fascia
Fascia
Insert
Cabinet
Fixing Points For
Seismic Restraint
Speed clip x4
Air Control
Knob
Spacer Washer
Hinge Pin
Diagram 2 - Fascia installation
A
Cable Clamp Slot