Metrodata FM4900, Руководство пользователя

Страница: 26 / 68

INSTALLING & SETTING-UP
76-02-011F 18
5. 2 Power-Up Sequence
When the FM4900 is powered up, it performs several system tests. After a few seconds the
start-up screen is shown on the terminal. Figure 5.1 below is an example only:
Cold start Warm start
Figure 5. 1 Start-up screens
In order to check or change any of the operating parameters, you will first need to gain
access to the FM4900's software by logging in. Press any key, and a logon message will be
displayed:
Figure 5. 2 Logon screen
There are two levels of user - Observer, or Operator. If you type VIEW as the password, you
will only be able to look at the current settings, and will not be able to change any of them. If
you enter the correct operator password, you can change any parameters that are not
defined as read-only.
The default operator password is the same as the model number, i.e. FM4900 . When you
have entered this once, you will be able to change the password if you wish, as described in
Section 6.3. When you enter the appropriate password, you will be presented with the
MAIN
SET-UP menu. All of the FM4900's operating parameters are accessed through this initial
menu.
Metrodata Limited
FM4900 HSSI E3 DSU
Metrodata Limited
FM4900 HSSI E3 DSU
Software version 3.9
Wide Area Network Kernel

1993 Martin Harvey
Real-time clock okay
time now: [time, date]
Cold-start requested from console
Cold-starting
Configuration data set to defaults
Performance log cleared
Software version 3.9
Wide Area Network Kernel

1993 Martin Harvey
Real-time clock okay
time now: [time, date]
Warm-starting
Metrodata FM4900: Local connection to " [nodename] "
password ('view' to view only):