Following start-ups
III - 16
Virtual digital oscilloscopes, 60 MHz
Following start-ups (continued)
Starting a WiFi
connection
(continued)
The search for a WiFi network is visible on the front face of the instrument;
the "READY" LED will rapidly blink for 40 blinks.
A maximum of 10 rapid blinks are shown; if the "READY" LED is permanently lit
before the 10 rapid blinks, the connection is established, otherwise the search
for an Ethernet cable connection is activated.
If successful the "WiFi" LED in the 'Start of an oscilloscope" window lights
in red:
On the rear face of the instrument, the green and yellow LEDs for the RJ45
network are lit:
Select 'Ethernet WiFi’ and click on
to start the instrument using
WiFi.
WiFi
communication ...
www.
GlobalTestSupply
.com
Find Quality Products Online at:
