METREL MI 3200, Руководство пользователя

Страница: 6 / 46

MI 3200 TeraOhm 10 kV Instrument Description
6
Legend:
1 .......... START/STOP key to start or stop any measurement.
2 .......... ON/OFF key to switch the instrument ON or OFF.
3 .......... MEM key to store, recall and erase results.
4 .......... SELECT key to enter set-up mode for the selected function or to select the
active parameter to be set.
5 ..........

cursor key to select an option upward.
6 ..........

cursor key to select an option downward.
7 ..........

cursor key to decrease the selected parameter.
8 ..........

cursor key to increase the selected parameter.
9 .......... ESC key to exit the selected mode.
10 ........ Light key to turn the display backlight ON or OFF.
11 ........ Positive Insulation Resistance test terminal (+OUT)
12,13 ... GUARD test terminals intended to lead away potential leakage current while
measuring the Insulation. Sockets under points 12 and 13 are connected
together inside the instrument.
14 ........ Negative Insulation Resistance test terminal . (-OUT)
15 ........ Screw (unscrew to replace the batteries).
16 ........ Galvanic separated
USB connector to connect the instrument to PC.
17 ........ Distributor label or could be blank.
18 ........ Galvanic separated
RS 232 connector to connect the instrument to PC.
19 ........ Mains connector to connect the instrument to the mains supply.
20 ........ Serial number of the instrument.
2.3. Accessories
The accessories consist of standard and optional accessories. Optional accessories can
be delivered upon request. See attached list for standard configuration and options or
contact your distributor or see the METREL home page: http://www.metrel.si.
2.4. Test leads
The standard length of test leads is 2m, optional lengths are 8m and 15m. For more
details see attached list for standard configuration and options or contact your distributor
or see the METREL home page: http://www.metrel.si.
All test leads are made of high voltage shielded cable, because shielded cable provides
higher accuracy and immunity to disturbance of measurements that can occur in
industrial environment.