METREL MI 3200, Руководство пользователя

Страница: 24 / 46

MI 3200 TeraOhm 10 kV Measurements
24
5.6. Diagnostic test
Selecting this function displays the following states (initial state and state with results
after the completion of the measurement). The
Fig. 15 shows states when Graph R(t) is
disabled.
Initial display – numerical mode
Display with results – numerical mode
Fig.15. Diagnostic test display states - Graph R(t) disabled
The
Fig. 16 shows states when Graph R(t) is enabled. When Graph R(t) is enabled you
can simple switching initial state and state with results after the completion of the
measurement, between numerical and graphical mode with pressing

or

keys.

graphical mode

numerical mode
Note:
- It is not possible to switching mode of presentation when measurement running!!!
Initial display - numerical mode
Initial display - graphical mode
Display with results - numerical mode
Display with results - graphical mode
Fig. 16. Diagnostic test display states - Graph R(t) enabled