Page 8
Tripod Turnstile Technical Manual
Wires installation
NOTE
Before the installation of the device the built-in anchors and wire installations must be checked.
Anchor position (orientation)
Check the position of both built-in anchors and their height and position according to the pavement.
Clean the surface of the built-in anchors.
Preparation of wiring
Put a ribbed plastic hose
30 millimetres for installation
of cables through the anchor on the
entrance side
. If
installation requires (for example: external Enter/Exit
buttons are on different location than Power supply and
Metra Net Network), more than one ribbed plastic hose
can be put in. Each installed cable should be at least 1.5
metre long from the ground.
Wiring
NOTE
Cables are always installed through the leg on the
ENTRANCE SIDE
of the Tripod Turnstile.
