Page 11
Tripod Turnstile Technical Manual
Other installation options
Alternative mounting options are also possible.
If installing Tripod Turnstile indoors into a solid
pavement, it can be mounted using wall plugs, anchor
bolts, anchor screws, and even special glues. However,
the underground wiring needs to be done before the
installation of Tripod Turnstile. Method should be chosen
depending on the pave type.
NOTE
Drilling holes in pavement is not advised in the following cases:
Non-solid pavement.
Floor heating.
Other floor installations.
NOTE
Wiring scheme remains the same for all kinds of installations.
Opening cover
STEP 1:
Unlock and remove the ticket container on one
side and the door on the other side of the Tripod
Turnstile.
STEP 2:
There is a buckle holding the Cover in place on
each side. Unbuckle them.
STEP 3:
Lift the Cover. If needed disconnect the
signalization panel, Reader (if present) and Wristband
Capturer (if present). Mark cables exact position.
