Metos Muster 800, Руководство пользователя по установке и эксплуатации

Страница: 19 / 29

18.9.2007 Rev. 2.4
Troubleshooting
13
6. Troubleshooting
Should the appliance fail to produce ice, before calling on the Authorized Technical Serv-
ice Centre, first check carefully that:
• The water supply tap provided in the istallation phase is open (see fig.).
• The electric power is reaching the appliance, the plug is properly inserted, and the
corresponding switch is in the “on” position.
• In the event of excessive noise, check that the appliance does not come into contact
with furniture or sheet metal that may cause noise or vibrations.
• Should any traces of water appear, check that the discharge pipe of the container
is not obstructed, that the water feed and discharge pipes are correctly connected
up and do not present any throttling or damage.
Once the above checks have been made, if the appliance were still to present malfunction-
ing, switch off the power supply via the switch provided during the installation phase, pull
out the plug from its socket, close the tap connecting the appliance up to the water supply,
and call the nearest Authorized Technical Service Centre.
In order to obtain a faster and more efficient intervention, when you call the Centre, indi-
cate the model of the appliance precisely, and its serial number. These can be read on the
matriculation lable stuck on the rear of the appliance or on the cover of this manual (see
fig.).
MALFUNCTION Possible cause Operation
Ice flake maker does not function Appliance does not function Check power supply
Thermostat in the container does not
func. Change the thermostat
Safety thermostat of the condenser does
not function. Change the thermostat
Safety pressure switch has cut off Settle the pressure switch
Evaporator safety thermostat does not
func Change the thermostat
Gearmotor klikson does not func. Change the klikson