Metos 92/04 TVTC, Руководство пользователя

Страница: 20 / 48

24.10.2007 Rev. 1.1
Operating instructions
14
Rust
If you need to remove rust stains, contact manufacturers of industrial detergents to find a
suitable product. Industrial descaling products can also be used to that end. After remov-
ing stains and rinsing off the appliance with clean water, an alkaline detergent may be re-
quired to neutralize any acid compounds left on the surface.
Cleaning the ceramic glass top
To ensure best use of the appliance, make sure to follow this advice :
• firstly, remove any residual grime and food from the top with a special scraper
(NON-ABRASIVE);
• pour a few drops of suitable detergent on the top when cold and rub with a paper
towel or soft cloth;
• rinse the top and dry with a clean cloth or paper towel;
It is advisable to regularly clean the top whenever it is used.
If aluminium foil, plastic wrap, sugar or foods containing sugar melt on the hob surface
they must be immediately removed from the hot cooking zone with a non-abrasive scrap-
er. This will prevent damage to the surface.
Before cooking foods with high sugar content (e.g. jam) apply a suitable protective prod-
uct on the cooking surface to prevent damaging it in case of spilling from the cooking con-
tainer.
4.3.2 Idle period
If the appliance will be idle for some time, clean it and wipe it dry first, and then apply a
film of a suitable product (such as vaseline oil spray or similar) to protect it. Switch the
power off fitted upstream from the appliance.
In order to prevent corrosion spots from forming, ensure that any salt residues are care-
fully removed from the sides, internally and externally.
4.3.3 Periodic maintenance
Only qualified personnel are allowed to carry out service and maintenance operations.
The following maintenance operations have be carried out at least once a year:
• checking that all control and safety devices operate correctly;
We recommend signing a service agreement providing for at least one check-up a year.