background image

INSTALLATION INSTRUCTIONS

20" (50.8 CM) FREESTANDING ELECTRIC RANGE 

with Standard Clean Oven

Table of Contents

RANGE SAFETY .............................................................................2

INSTALLATION REQUIREMENTS ................................................3

Tools and Parts ............................................................................3
Location Requirements ................................................................3
Electrical Requirements ...............................................................5

INSTALLATION INSTRUCTIONS ..................................................6

Unpack Range..............................................................................6

Install Anti-Tip Bracket.................................................................6
Electrical Connection ...................................................................7
Verify Anti-Tip Bracket Is Installed and Engaged ......................11
Level Range................................................................................12
Complete Installation .................................................................12

Check Operation ........................................................................12

W10459122A

IMPORTANT:

 

Save for local electrical inspector's use.

Содержание W10459122A













Отзывы: