Metos 74/02+2CTGG, Инструкция по установке и эксплуатации

Страница: 34 / 76

27.2.2004 Rev. 1.0
Installation
26
5.12.3 Following phases valid for all models
• Place the manometer;
• start up the unit by following the instructions in the user's manual;
• check supply pressure;
• if the actual pressure is included in the values previously shown in the "Table 1:
gas categories and pressure values" , the unit may be turned on, otherwise, contact
the gas utility company;
• remove the manometer;
• reassemble the sealing screw (item 3 in Fig. 10 e Fig. 12);
• check for a good seal (see the preceding chapter "Gas supply connection" ).