Metos 74/02+2CTGG, Инструкция по установке и эксплуатации

Страница: 27 / 76

27.2.2004 Rev. 1.0
Installation
19
5.9 Positioning the appliance
Level the appliance using a bubble level. Height can be adjusted with the help of the ad-
justable feet.
5.10 Electrical connections (versions with electric oven and/or hot cup-
board)
5.10.1 General information
The appliance should be operated only when properly connected to an effective earthing
(grounding) system.
The appliance is pre-set to be wired to the electrical switchboard. Before connecting the
appliance to the power supply network, check:
• that distribution network voltage matches the voltage shown on the appliance’s rat-
ing plate;
• that the grounding (earthing) system is effective;
• that the power cord is made of rubber and is of at least the same quality as cable
type H07RN-F, with conductors having a cross section suited to the maximum load
they will carry (refer to
"Technical specifications table" at the end of this manual);
• an effective multi-pole breaker having a contact gap of at least 3 mm should be fit-
ted upstream of the appliance at the time of installation. The multi-pole breaker
should be installed in the immediate vicinity of the appliance and be readily acces-
sible. We recommend fitting a thermal-magnetic circuit breaker with built-in fuse
protection;
• the power cord of the appliance should not be exposed to direct heat sources.