Metos 72/02TVTC, Инструкция по установке и эксплуатации

Страница: 22 / 50

4.2.2004 Rev. 1.0
Installation
16
5.4 Storage
If the appliance is stored in a warehouse where room temperature is below 0°C (32°F), it
should be warmed up to at least +10°C (50°F) prior to use.
5.5 Unpacking the unit
Prior to installation, remove all packing materials from the appliance. Some parts are
wrapped in adhesive film, which should be thoroughly removed (see paragraph "4.1.1
Preparing the appliance to operate").
5.6 Disposing of packaging materials
All packing materials should be disposed of in compliance with local regulations in force
where the appliance is installed. Packing materials should be separated according to their
types and delivered to specific collection sites. Ensure compliance with environmental
protection regulations.
5.7 Positioning
Always disconnect power to the appliance before carrying out work on it.
Level the appliance using a bubble level. The appliance’s height can be adjusted by means
of its adjustable feet. In this way, the appliance will be firmly secured.
Ensure compliance with all workplace fire and safety regulations.
If the appliance is installed with its sides next to flammable walls (made of wood or sim-
ilar materials) or heat-sensitive walls (made of plasterboard or similar materials), suitable
protective measures should be taken to keep such walls undamaged. Apply a coating to
insulate them from radiative heat or keep a minimum side and back clearance of 300 mm
(11.8").