www.metel.eu
7/10
Installation manual REV:201301
2G(200M)-2.1.4.E PoE++
LAN-RING System PoE++ Managed Switches
LAN-RING
IP: 10.0.1.25
Port: 10485
IP: 10.0.1.27
Port: 10485
IP: 10.0.1.26
Port: 10485
TCP Client
The setting consists of the following steps:
1. In menu
„Bus/Mode“
set the system you are using. If not provided select “
RS485
” set „
Speed
“ and „
Data bits
“. If the system
is provided in the menu no further setting in menu
„Bus“
is needed. The switch sets it automatically.
2. In menu „
Ethernet/TCP Port
“ set numbers of TCP ports that will be used by a TCP client to establish communication.
3. Configure the TCP client in a PC with installed application (e.g. integration software).
Setting of RS485 transmission in
TCP mode
Fast Ethernet
LEGEND
RS485
Gigabit
1x MM or SM fibre
