www.metel.eu
4/10
Installation manual REV:201301
2G(200M)-2.1.4.E PoE++
LAN-RING System PoE++ Managed Switches
LAN (UTP)
Supported formats
FE UTP ports: 10BaseT, 100BaseTx
GE UTP ports: 10BaseT, 100BaseTx, 1000BaseTx
Overvoltage protection
FE ports: 1000
A
8/20us
GE ports: 30
A
8/20us
Connectors
RJ45
Relay output
Max. load
62,5VA (30W) / 1A / 60V
resistive load
With PoE
48-57
VDC
With PoE++
53-57
VDC
Power consumption
Max. 5
W
Protections
Overvoltage / current
100A (8/20µs)
Environment
Operational range
–40...+70
°C
temp. of environment
Storage range
–40…+85
°C
Humidity
max. 95%
non-condensing
Management
Local / remote
USB / application SIMULand
/ Win XP. 7 32 and 64bit
Power supply
Without PoE
10-60 / 10-30
VDC/AC
Certification
TÜV
The producer retains the right to change any technical parameters without previous announcement.
Parameter
Value
Unit
Note
1x Gigabit Ethernet port
The port support standards 10BASE-T, 100BASE-TX, 1000BASE-T incl. functions: Auto-negotiation, Auto MDI/MDI-X, Power-down.
3x Fast Ethernet port with PoE+ (15,4W) support
The port support standards 10BASE-T, 100BASE-TX incl. functions: Auto-negotiation, Auto MDI/MDI-X and Power-down. The
ports also support supplying of terminal devices over Cat-5e cable acc. to IEEE 802.3-af / IEEE 802.3at (max. 15,4W per port).
1x Fast Ethernet port with PoE+ (90W) support
The port support standards 10BASE-T, 100BASE-TX incl. functions: Auto-negotiation, Auto MDI/MDI-X and Power-down. The
ports also support supplying of terminal devices over Cat-5e cable acc. to IEEE 802.3-at / IEEE 802.3at (max. 90W).
2x supply input
The switches are equipped with 2 independent supply inputs.
IP Watchdog
The switches are equipped with integrated IP Watchdog on FE ports. In case of failure they can reset PoE supply, activate relay
output or send a SNMP trap.
Support of SNMP, SMTP, SNTP, IGMP, UPNP
SNMP
Protocol for data acquisition and control via LAN.
SMTP
Protocol for sending e-mails.
SNTP
Protocol for centralized time synchronization.
IGMP
Protocol for the management of multicast groups.
UPNP
The protocol for the detection of devices connected to the LAN (switches only support the transfer UPNP).
Support of VLAN, 802.1p/q, QoS
The switches support setting of VLAN, priorities and band width independently on all Ethernet ports.
Support of logging to SD card
The switches support logging of important operating data to a SD card.
Technical parameters
