Metcalfe A300, Инструкция по эксплуатации и техническому обслуживанию

Страница: 7 / 14

7
INSTALLATION
The slicing machine must be placed on a horizontal flat surface which is stable and non-
slip, suitable for sustaining the weight of the machine and the food; a support column
with top is available on request.
We advise a height of the work top of about 800-900mm.
Check that nothing gets in the way of the carriage run and loading food on to the plate.
The machine must be installed near an EEC regulation socket derived from a plant
conforming to the norms in force (magnetic thermal differential protection, grounding)
Before connection ensure that the features of the electric power supply system
are the same as those indicated on the data plate of the machine.
In the case of three-phase machines the socket must be a five-polar type:
three-phases, neutral, ground.
The machines are equipped with an electrical cable about 2 metres long, foreseen for a
plug-socket power system so that it is easy to detach the same from the electric system
in the foreseen conditions (maintenance, end of shift, anomalies…).
The presence of the power supply cord must be marked if people walk through this area.
It is forbidden to use extension cords and/or multiple sockets.
CHECKING THE ROTATION DIRECTION OF THE BLADE (THREE-PHASE MODELS)
When you plug on the electrical cable, check that the light above the off button comes on
and then start the blade by pressing the button ON.
Check that it turns counterclockwise when looking at the machine from the blade
cover disc side (21).
If the blade turns in the opposite direction (clockwise) immediately stop the machine and
call a professionally qualified person to change the position of the wires of two of the
phases at the plug terminals.
Check that the food plate (7) and food press both slide (4).
Check the function and the regulation of the thickness gauge plate (17).
PUSH BUTTON CONTROL PANEL
1. Off button
2. Light of off button
3. On button
4. Light of on button
5. Speed button
6. Light of speed button (from 1 to 3 led)
One led on: low speed
Two led on: intermediate speed
Three led on: high speed
7. Stroke button (for carriage run)
8. Light of stroke button (from 1 to 3 led)
On led on: short carriage run
Two led on: intermediate carriage run
Three led on: long carriage run