3
3
META Air Light models
META Air /CAM
models
2
1
4
13
EN
15. Commissioning and usage
See picture
3
i
Automatic start-up: If the pressure in the air receiver drops,
the compressor will switch on automatically until the maxi
-
mum operational pressure is reached again.
If the maximum operational pressure is exceeded,
the compressor power unit must be switched off and
disconnected from the mains (remove the power plug.)
Inform an authorised technician.
In the event of danger, disconnect the compressor from the
mains (remove the power plug). The compressor has hot
surfaces and may cause burns upon contact.
Plug in the power cable and connect the air hose (1). Turn the pressure
switch (2) to position “1”. The compressor operates fully automatic and
is controlled by the pressure switch which stops when pressure in the tank
(3) reaches the cut out pressure, allowing compressor to start again when
it reaches the cut in pressure.
The current pressure can be read on the pressure gauge (4).
Commissioning and usage
Technicians
