13
OPERATION MANUAL
MANUAL BACK GAUGE
Consists of two arms similar to the front stops. These
are positioned on the underside of the top beam.
Adjustment for being level and parallel can be made
as for the front stops. Once the arms have been posi-
tioned, slide the “slide blocks” onto the arms and bolt
the back gauge to the blocks. (Fig.3.6, 7)
NOTE:
Ensure that the brass slug is under the bolt
clamp to avoid damage to the arm.
q
To adjust the back gauge, undo the clamp and
slide the back gauge to the required setting and
re-tighten the clamp.
F
ig
. 3.6
F
ig
. 3.8
ATTACHING THE MOBILE FOOT PEDAL
q
Unpack the mobile foot control and plug it into the socket provided on the back of the
control box located on the side of the machine. (Fig.3.8) The plug and socket are fitted with
a location slot and key and will only connect in the one position
F
ig
. 3.7
22/07/2019
Instructions Manual for SG-420 (S535)
13
