7
OPERATION MANUAL
2.1 SAFETY REQUIREMENTS. Cont.
Before Operating
r
Make sure any trip or slip hazards around the machine have been removed.
r
Make sure the task that is to be done is clearly understood by operator.
r
Ensure press is in good working order without visible damage to structure or hydraulic
fluid leaks.
r
Ensure work piece is placed squarely on the plate.
r
Clamp work piece (if appropriate).
Operation:
r
Keep hands and body clear of the press mechanism when lowering the ram.
r
Lower ram until it contacts the work piece.
r
Adjust pressure of ram to desired setting.
r
Identify ON/OFF switch and emergency stop button
After Operation
r
Ensure the area is clear of other people.
r
Release pressure on hydraulic press.
r
Slowly raise ram and remove work piece from plate.
r
Return work pieces and other items to storage area as appropriate
WARNING
PINCH POINT DANGER
This machine has a high risk of fingers, hands or arms being caught in a pinch point. Make sure
that you are aware of where your arms and hands are at all times when operating the machine.
WARNING : Material under pressure has been known to shatter. It is advised to wear
a full face mask.
Appropriate footwear and clothing should be worn around and while operating the
press
Gloves should be worn when handling components that have sharp edges
Before operating this press operators should have read and understood the manual.
Store the manual in a safe place so it can be used for future reference.
