12
TBS-Series | Version 1.03
Spare parts
12 Spare parts
12.1 Ordering spare parts
The spare parts can be obtained from the dealer or di
-
rectly from the manufacturer. The contact details are in
chapter 1.2 Customer Service.
Specify the following key data for inquiries or when orde
-
ring spare parts:
- Type of device
- Article number
- Part number
- Quantity
- Year of manufacturing
- Required mode of dispatch (mail, freight, sea, air,
express)
- Address of dispatch
Spare parts orders without above given information can
not be considered. If the shipping method is missing,
shipping will be at the discretion of the supplier.
Information on the device type, article number and year
of manufacture can be found on the type plate, which is
attached to the device.
Example
The upper knife for the Manual sheet metal shear
TBS 1501-15 must be ordered. The upper knife has the
number 47 in the spare parts drawing 1.
By ordering spare parts, send a copy of the spare parts
drawing (1) with the marked part (upper knife) and mar
-
ked positon number (47) to the dealer or spare parts de
-
partment and provide the following information:
- Type of device:
Manual sheet metal shears
TBS 1501-15
- Item number:
3746015
- Drawing number:
1
- Position number:
47
Item number of your device:
Manual sheet metal shears TBS 1501-15:
3746015
Manual sheet metal shears TBS 2001-12:
3746020
DANGER!
Danger of injury by the use of
wrong spare parts!
Dangers may result for the user and damages as well
as malfunctions may be caused by using wrong or
damaged spare parts.
- Only use original spare parts of the manufacturer or
spare parts admitted by the manufacturer.
- Always contact the manufacturer in case of uncerta-
inties.
Tips and recommendations
Using non-approved spare parts voids the manu
-
facturer's warranty.
