Description
TBS-Series | Version 1.03
7
Transport
Transport with a forklift / pallet truck:
The unit is delivered on a pallet so that it can be trans
-
ported with a forklift or pallet truck.
Transport by crane:
Fig. 3: Stop of ropes for transport by crane
Transport only with steel cables and hooks designed to
weigh at least 1 tonne. The attachment points for the
transport must be used on the sheet metal shears (Fig.
3).
5.2 Packaging
All used packaging materials and packaging aids of the
appliance are recyclable and generally need to be trans-
ported to the material recycling.
Crush the packaging material made of cardboard and
supply it to the waste paper collection.
The films are made of polyethylene (PE) and the uphol-
stery parts are made of polystyrene (PS). These materi-
als have to be delivered to a recycling station of the re-
sponsible dumping company.
5.3 Storage
Thoroughly clean the sheet metal shears in a dry, clean
and frost-free environment.
6
Description
Illustrations in this operating manual serve the gene
-
ral understanding and may deviate from the actual
design.
Fig. 4: Description TBS 1501-15
1 Transport lifting point
2 Hand lever
3 Work table
4 Material support, extendable
5 Adjustable backgauge
6 Hole for anchoring
7 Hold downs
6.1 Scope of delivery
- Rear stop
- Two control handles
- Instruction manual
WARNING!
Risk of death!
If the weight of the machine and the permissible lif-
ting capacity of the lifting gear are not observed
during transport or lifting, the machine may tip over
or fall.
- During transport and lifting work, pay attention to
the weight of the machine. The means of transport
and lifting equipment must be able to take up the
load.
- The transport may only be carried out by specia
-
lists.
NOTE!
Protect the sheet metal shears from moisture.
1
2
6
4
7
3
5
