Metal Samples Company MS3500E, Руководство пользователя

Страница: 14 / 54

10
The screen of the instrument is initially activated by pressing either key. The “SET TIME & DATE”
function screen is then accessed by scrolling through the main menu using KEY 1. KEY 2 allows entry
into the submenu, and the time and date setup screen will be shown. Each digit of the time, day, month,
and year is sequentially set using KEY 1 to select the appropriate digit, and KEY 2 to enter the digit
and move the next digit of the time and date sequence.
Once the final digit of the year is entered, using KEY 2, the screen will automatically change to the time/
date display screen. This screen shows the time and date as set up. KEY 2 will accept and store this time
and date. KEY 1 will reject this information. Either key will automatically return the user to the “MEA-
SURE PROBE” screen of the main menu. If the time and date has been rejected, scroll to the “SET TIME
& DATE” function screen, reenter the submenu and make the necessary corrections. If the time and date
are correct, and the user has used KEY 2 to accept the information, scroll to the “ENTER PROBE ID”
function screen to continue with program setup.
Please note that the time and date, once set, should not require alteration except after battery
replacement. Should the user decide to change the time and date while probe data is stored in
memory, all data will be displaced in time and highly inconvenient to interpret.
B. Program Setup
Having installed the batteries, the MS3500E is ready for start-up programming which compromises the
following sequence:
• SET TIME AND DATE
• ENTER PROBE ID
• START LOGGING
1.Set Time and Date
This operation is illustrated below: