Metacon-Next OHD-C EI 120, Руководство пользователя

Страница: 8 / 37

Metacon-Next B.V. OHD-C EI(1) 60 / EI(2) 90 / EW 90 & OHD-C EI(1) 120 18-07-2022
User manual art nr: 89022 Rev: 4
8
4 Usage instructions
4.1 Normal use (not during fire alarm/calamity)
Before and during the operation of the door, the following steps should be observed;

Before you operate the door, you should take note of the safety instructions in
Chapter 3.

Check that there is nothing or no one around, against or under the door while
operating the door, do not start or stop operating the door immediately if there is.

You operate the door by means of the control device, usually push buttons or a key
switch. While operating the door, you stay at a sufficient distance but within sight of
the moving part of the door, 2-8 mtr.

Make sure that while operating the door, it actually moves in the correct direction, if
it does not, stop operating and/or press the stop button and contact the supplier
immediately.

Keep a view of the door at all times during movement.

Make sure the door is fully opened when opening and fully closed when closing to
promote durability.

If irregularities are detected while operating the door, stop operating and contact the
supplier. Possibly an unsafe situation arises, cordon off the area so that the
passageway cannot be used, e.g., if the door is not fully opened or closed.
The door can be protected against entrapment of objects and/or persons in several ways.
NOTE: Holding the control will override the protection.

In the case of hold-to-open/hold-to-close operation, the door will stop immediately
after releasing the control.

If an safety edge protection function is present, the door will automatically go back
up after contact with an object and/or a person. Possibly a set of photocells can be
added to the safety edge protection function.

When a set of photocell curtains is installed, the door will not close when the sensor
detects an object in the path of this security. Please note that this only works in the
line/area of the security sensor. No object and/or person will be detected outside of
this.
Note that safety devices are not designed to operate the door!
In order to put the door back into operation after a safety edge/ photocell curtains has been
triggered, you must remove the objects and/or persons from the detection area of the safety
edges.