Metacon-Next B.V.
OHD-C EI(1) 60 / EI(2) 90 / EW 90 & OHD-C EI(1) 120
18-07-2022
User manual
art nr: 89022
Rev: 4
21
Step 5b - Mounting motor slide & chain drive motor
Mount the motor slide.
Check that the housing of the limit switch is in the correct position, it must not
be in contact with the chain.
Mount the control box and connect it to the power supply including the battery
if included as well as the safety brake.
Please note: any other components may only be connected at step 11 of
this manual!
Check that the direction of rotation corresponds to the buttons in the control
box at the connection to which the door is to be adjusted.
Place the sprocket on the axle journal, with the hub pointing towards the
engine.
The motor can now be mounted on the motor slide with the fasteners (as
provided) in the middle position of the range of adjustment of the motor slide.
Align sprockets both horizontally and vertically and secure with the locking
screws.
