
Metacom MC601 Router
Page 14
User Manual
Stopping networking on device: eth0
Setting up networking on device: lo
Setting up networking on device: eth0
Setting up networking on device: eth1
Setting up nameservers in /etc/resolv.conf
Reset
Reverts the settings back to their original values.
Note:
If the LAN1 settings change the DHCP settings and firewall forwarding rules might have to be
changed as well.
LAN1 and LAN2 must be 2 totally separated networks.
Please try not to use the following IP address ranges as they could clash with the WAN/VPN
IP addresses: 10.3.0.0/16, 10.128.0.0/16, 10.129.0.0/16, 10.254.0.0/16, 10.0.0.0/16,
10.253.0.0/16, 10.252.0.0/16, 172.16.0.0/16, 192.168.2.0/24
Version l2tp-20071207-2203: Please restart the router if DHCP is used and the LAN1
network changes. This is due to the fact that the DHCP service is not restarted. It has been fixed
in l2tp-20080218-2205.
Cellular Continuum Series
Copyright © Metacom (Pty) Ltd