ENGLISH
9
3.3
Symbols on the machine
4.1
Prior to initial operation
Install the plug nipple.
4.2
Using the Tool
A
Caution!
The compressed air line must be free of
condensed water.
A
Caution!
To ensure a long service life of this tool,
it needs to be supplied with sufficient
quantities of pneumatic oil. This can be
achieved by:
– To obtain oil-containing compressed
air attach an oiler or in-line oiler
or
– manually pour about 3 to 5 drops of
pneumatic oil per 15 minutes of op-
eration (continuous operation) into
the compressed air port or the fill
hole for pneumatic oil.
If the tool has not been used for a peri-
od of at least several days manually
pour about 5 to 10 drops of pneumatic
oil into the compressed air port or the
fill hole for pneumatic oil.
1. Put socket on the drive.
2. Set direction of rotation with the re-
versing knob:
– F = Forward (clockwise)
– R = Reverse (anticlockwise).
3. Set the operating pressure on the
compressor (see 'Technical data' for
maximum allowable working pres-
sure).
4. Connect quick coupler to the air
supply.
5. Pull trigger to start.
A
Danger!
Always disconnect from air supply be-
fore servicing.
Maintenance and repair work not de-
scribed in this chapter must be carried
out by
qualified specialists only
.
Check all screwed connections for
tightness and tighten if necessary.
Clean the filter in the compressed
air connection at least once a week.
It is recommended that a pressure
reducer with water separator and
oiler be connected in front of the
tool.
Do not store tool unprotected out-
doors or in humid environment.
A
Danger!
Repairs to air tools must only be carried
out by qualified specialists!
Air tools in need of repair can be send
to the service centre in your country.
Refer to spare parts list for address.
Please attach a description of the fault
to the air tool.
All packaging materials are recyclable.
End-of-life tools and accessories con-
tain large amounts of valuable raw ma-
terials and plastics which must be recy-
cled.
This manual was printed on chlorine-
free bleached paper.
1.Ratchet Wrench 1/2" RS 320
1 Plug R 1/4" m
1 Operating Instructions
Pneumatic oil, 0.5 l,
art. no.: 090 100 8540
Attachment oiler, R 3/8",
art no.: 090 105 4592
Please read the manual before
using the tool.
Wear eye protection.
Wear ear protection.
CE symbol
4.
Operation
7
8
9
10
5.
Care and Maintenance
6.
Repairs
7.
Protection of the Envi-
ronment
8.
Scope of delivery
9.
Accessories
