Meta System GPA600, Инструкция по установке и программированию

Страница: 6 / 20

SCROLL UP
KEY TO GO THROUGH
MENU (FORWARDS)
- KEY TO ENTER MENU
- CONFIRM FUNCTIONS
- STORE DATA
DISPLAY MESSAGES
OK
ENTER
KEY TO DELETE AND EXIT
WITHOUT MAKING
CHANGES
C
CANCEL
KEY TO ENTER DATA IN
LETTERS AND NUMBERS
1
*
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
9
WXYZ
c
CANCEL
0
SPACE
OK
ENTER
+
6
NB:
If the speedometer cable is connected to pin 6 on the device, connect in parallel using the “Y” cable supplied with the Sat
Programmer.
SWITCHING ON
•
Connect the Sat programmer to connector 6 on the
device. The display appears as shown opposite,
indicating that the device is in maintenance mode (the
example refers to a GPA 800)
DESCRIPTION
SOLVING PROBLEMS WHEN SWITCHING ON
PROBLEM
•
Does not switch on
•
Check electrical connections especially connections
to the power supply
•
Check connection of the SAT Programmer to the
device.
Contact the Help Desk if the problem persists
THE SAT PROGRAMMER
The system must be checked by means of the dedicated ‘Sat Programmer’ interface
6
GPA800 OK
In maintenance
MESSAGE ON THE DISPLAY
HOW TO ACCESS MENUS (ACCESS LEVELS)
Access to menus is structured in levels that are entered by keying in the relative passwords.
These must be changed once the system has been installed.
All the menus needed to complete the configuration of the product are present at INSTALLER level. As you go down the
various levels, only certain utility menus will remain accessible. The structure in levels prevents the possibility of
parameters being altered by unauthorised personnel.
It is possible to scroll through all the menus available after a level has been reached using the (
▲ ▼
) arrows.
SOLUTION
MULTIFUNCTION
KEYS
+
-
SCROLL DOWN
KEY TO GO THROUGH
MENU (BACKWARDS)