Meta System GPA600, Инструкция по установке и программированию

Страница: 17 / 20

17
VEHICLE CONSIGNMENT
CUSTOMIZING THE PASSWORDS
After completing installation, for safety reasons, you must alter the passwords to access the various levels in the Sat
Programmer. This will allow the product to be used and programmed only by authorised personnel in possession of the
correct access codes.
The passwords for the UNBLOCKED and UNBLOCK FUNCTIONS l evels must be keyed in by the vehicle’s owner alone.
These passwords must remain confidential. The installer must key in his own secret password.
In this way, the user (if provided with the Sat Programmer) will only be able to access certain utility levels, such as
phonebook management, but will not be able to alter any parameters that are fundamental for the correct operation of the
device. In the same way, the installer cannot access the product unless it is first disarmed by the owner by means of his
password.
It is possible to access all the menus for the modification of the passwords from INSTALLER level.
This is the UNBLOCKED level password. The default setting
is 11111 but it will be displayed as asterisks at installer
level for a question of confidentiality.
The password can be any number with 5 to 8 digits
This is the UNBLOCK FUNCTIONS level password. The
default setting is 33333 but it will be displayed as asterisks
at installer level for a question of confidentiality.
The password can be any number with 5 to 8 digits.
This is the INSTALLER level password. The default setting is
44444. The number is displayed since there is no need for
confidentiality since it is the installer’s own number. The
password can be any number with 5 to 8 digits
Installer
code>> 12345678
NB: The code must be a number composed
of 5 to 8 digits.
200
300
202
Installer
code>> 44444
E.G. :
DISPLAY WHAT IT MEANS
QUICK
COMMAND
Installer OK
Select function :
Enter new code
OK to store C to cancel
Unlock
code>> ********
Function Enable
code>> ********
Installer
code>> 44444