Met One Instruments LVS-100, Руководство пользователя

Страница: 22 / 67

Installation MicroVol-1100 User manual 1.6
moisture visible on the inlet components. Always cover the inlet tube when the
impactor assembly and filter holder are removed outdoors.
The sampler should be located in a position that will allow it to collect a sample
representative of the area of interest, without being influenced by any non-typical
factors. For outdoor use, keep the sampler away from obstacles such as trees, exhaust
and inlet ducts, edges of buildings, etc. Consult the relevant local standards for further
information on siting air samplers.
2.4 Connecting power
2.4.1 Mains power adaptor
Figure 4 Mains power adaptor
Attach the power connector to the underside of the MicroVol-1100. Switch on the
power to the mains adaptor at the wall-socket.
The Mains power adaptor has an IEC 320 2-pin connector. It may be necessary to
purchase an input lead to suit the local power point outlet configuration.
The Mains power adaptor operates on most AC power supplies, from 100-240V, and
either 50 or 60 Hz.
2.4.2 Connecting power – Battery pack option
If the battery pack is being used, first connect the power lead to the underside of the
MicroVol-1100. Then centre the MicroVol-1100 on top of the battery pack. The latch
tension may be adjusted if necessary by turning the threaded part of the latch. Do not
12