Docking Station Set Up Manual 83529-9800 Rev A
Page 12
4. Download the Ethernet Utilities from
on the Ethernet Drivers and Utilities zip folder and select Extract All.
5. Click on the IPSetup Application. The following screen in Figure 11 will appear:
Figure 11 - IPSetup Application
6.
Click on the “Select a Unit” line that shows a DHCP’d in the title.
7. Type in your static IP address in the IP window.
8. Type in a Network Mask in the Network Mask window.
9. Set the baud rate to the Dock Baud of the device to be used (default is 38400).
10. Press the Set button to change the IP address of the docking station.
11. Click the Launch Webpage button to open a browser for webpage configuration.
12. Click the X close button.
4.3.2. Web Page Configuration
1. Open a web browser and enter the numeric IP Address in the address field if
Launch Webpage was not selected in IPSetup. The first section of the Network
Configuration page is used to select DHCP or static IP addressing.
a. If DHCP is selected, and there is a DHCP server on the network, the
DHCP assigned values will be displayed. To select a static IP address
change the Address Mode to Static, and enter the values in the Static
Settings fields.
