Messtechnik Sachs Irinos IR, Руководство пользователя

Страница: 185 / 214

185
Irinos IR Users Manual © 2015 - 2016 Messtechnik Sachs GmbH, Germany
Troubleshooting and "first aid"
In case the DHCP-Server of the Irinos-System is enabled, the
option "Optain an IP address automatically" must be enabled (see
left figure below).
In case the Irinos-System has a fixed IP address, the PC must
also have a fixed IP address. Both IP addresses must be within
the same subnet. In most cases the subnet mask 255.255.255.0
is used. In this case the first three elements of the IP addresses
must be the same. If the Irinos-System for example has the IP
address 192.168.178.1, the PC must have an IP address of the
range 192.168.178.2 to 192.168.178.254 (see right figure
below).
If necessary, change the Windows IP settings.
Windows IP configuration
Adopting the communication settings for the measurement
application
f) If a connection is established via the Irinos-Tool, is generates the
configuration file Msc.cfg. It is located in the same directory as
the Irinos-Tool.
The same configuration file is required by the measurement
application. It must be located in the same directory as the
MscDll.dll.
Copy the file Msc.cfg from the directory of the Irinos-Tool into the
directory of the measurement application. In case this file already
exists, it must be replaced.
g) Start the application. The connection should now be established.